Panel Raiser
CSPR180
This cutter works with our cabinet and door sets to shape interior panels with a cove profile. Once you run your hand aross the cross-grain panel cuts and feel the finish-quality cut for yourself, you'll know how much time spent on sanding and touch-ups you saved by using our Panel Raiser.

Knowledge Center
- Equipped with profile knife for curve profile as seen in the tool drawings.
- Good for panel thicknesses from cabinet size (min. 16mm) all the way to 2¼" doors.
- ⌀180mm cutter drops below shaper table to cut panels- check your shaper's table rings to confirm your shaper can accommodate this tool.
- You will need a table ring opening of 7.5"/190mm, and clearance depth of 1.25"/32mm below the table surface.
Technical Information
Cutter Diameter: 180mm
RPM Range: 4200 - 8000
Material Thickness: ¾" to 2¼"
Bore: 40mm (Bushings supplied for 1 ¼ " and 30mm spindles)
Share Also Contains
Insert Knives
3 Profile 75x30x2 mm
Bushings/Sleeves/Rings
1 Bushing 40mm to 30mm
1 Bushing 40mm to 1-1/4"
1 Top Ring
Wrenches
1 Wrench 5 mm Hex
The Hub for Panel Raiser
Member Discussion - Panel Raiser